W'LESS LAN MNGD ACCESS POINT 2750
WIRELESS LAN MANAGED ACCESS POINT 2750
PI DATE : Oct 2004
PORTS: 1 x 10BT/100B-TX intg 802.3af-compatible PoE port with auto-nego,
serial console port, DC power connector for non-PoE operation
INTERFACES: RJ-45, 802.11a, 802.11b, 802.11g, DB-9
FREQUENCY BAND: 802.11a: 5 GHz , 802.11b/g: 2.4 GHz
OPERATING RANGE: 802.11a: up to 50 meters (164 feet) transmit & receive;
802.11b/g: up to 100 meters (328 feet) transmit & receive
OPERATING CHANNELS:Channel availability depends on local countryregulations
Wless LAN sys admn must choose correct country of operation
Channels are then automatically configured to comply with specifie
country's regulations
SECURITY: Ver. 1 and 2 48/104-bit WEP, WPA, and 128-bit AES encryption,
mutiple broadcast SSID support at the MAP; IEEE 802.1X network
login or 802.1X RADIUS authentication; access control lists (ACLs
VLAN & VPN support; 802.11i draft support at the switch/controlle
MANAGEMENT: Central management with Web browser via local console or
remotely over SSL or HTTPS; command line interface via local console or
remotely over SSH v2 or Telnet; 3Comr Wireless Switch Manager
SYS REQS : 3Com Wireless LAN Switch WX1200 or
3Com Wireless LAN Controller WX4400 required for MAP operation
* Each AP2750 handle multiple BSSID/SSIDs to appear as multiple access poin
* Supports 802.3af-compatible Power over Ethernet (PoE), so data and power
are supplied over the same Ethernet cable eliminating the need for power
adapters, power cords or AC outlets
PCKG CONTS : 3Com Wireless LAN Access Point 2750, Four rubber feet,