Products / Storage / SONY Tape Drives
SONY Tape Drives
AIT AIT-1 Turbo
.JPG)
SONY code: AITI100A
Description
AITI100A INT 40-104GB IDE KIT
Int IDE AIT-1 Turbo Tape Drv (Accessorised Kit) 40GB (Native) 104GB (Compr) 6MB/s Native Tr/Rate AIT Tape Cleaning Tape black+beige bezels supplied
Order code: SNY0509
Price: $1041.95*
STOCK STATUS:
Stock on hand: 1
Committed orders: 0
On order due: 0
PI DATE : JANUARY 2005
COMPATABILITY : Formats Supported: AIT-1 TURBO, AIT-E TURBO, AIT-1
Media Supported: 8mm 230m (with or without MIC)
PERFORMANCE : Native Capacity: 40GB ,
Native Storage Speed: 6MB/S ; COMPR : ALDC (HW) ,
INTERFACE SPEED: Burst Transfer Rate 66MB/sec (Ultra DMA mode 4)
BUFFER: 12MB Buffer
AVERAGE ACCESS: 35s (AIT-1 TURBO MIC Tape), 40s (AIT-1 TURBO Non-MIC Tape)
RELIABILITY : Writing Method: Helical Scan with RAW ,
Data Integrity: 3 Level ECC ,
Error Rate: <1 block in 10 pwr -17 bits (ECC ON)
MTBF: 300,000POH @ 100% Duty Cycle
CONNECTION : Interface: ATA/ATAPI-6 Ultra DMA mode 5
Socket: Internal Ultra DMA 40pin Female
Voltage: DC 5V 0.9A (1.2A max), DC12V 0.3A (1.2A max)
POWER: 7W Typ operating
DIMENSIONS: 5.25": 146 (W) x 41.2 (H) x 155 (D) mm ; Weight: 0.97Kg
SYS REQS : HW : Desktop or Tower PC with 3.5" or 5.25" 1/2 hgt open
front drive slot, at least one available power connector,
Ultra DMA 40pin/80wire internal connector
HW Additional: Some machines may require model specific rails which
must be purchased from PC manufacturer/dealer , A std IDE ATAPI I/F conn
can be used but slows performance
SW (PC): Pentium or above based machine with CD-ROM drive,
Win 95, 98,Me, XP, NT or 2K, 64MB RAM (minimum), 50MB Hard Drive space
ASSOCIATED PRODUCT LINKS:
MEDIA
SNY8905......25-50GB 170M AIT-1 TAPE 16KBSNY8906......35-90GB AIT MEDIA WITH MIC SDX135C
SNY0154......STRDE400S 5.1 CH RECEIVER - SILVER
RELATED CODES
SNY0512......AIT-E 20GB TAPE MEDIA TAITE20NSNY0513......AIT TURBO 1 MEDIA CHIP
SNY0514......AIT TURBO 1 MEDIA NO CHIP