PAP2T 2 PORT FXS PHONE ATA
Phone Adapter with 2 Ports for Voice-over-IP Enables feature-rich telephone service 2 telephone jacks for your phones or fax machines
PI DATE : November 2006
I/FACES: 1 x 10/100baseT RJ-45 Ethernet Port (IEEE 802.3)
2 x RJ-11 FXS Phone Ports-For Analog Circuit Tel Device(Tip/Ring)
DIMENSIONS: 101mm x 101mm x 28mm - W x H x D
* Impedance Agnostics - 8 Configurable Settings
* Call Waiting, Cancel Call Waiting, Call Waiting Caller ID, Caller ID
with Name/Number (Multi-national Variants)
* Caller ID Blocking , Call Forwarding: No answer, Busy, All Do Not Disturb
Call Transfer
* Three-way Conference Calling with Local Mixing
* Message Waiting Indication - Visual and Tone Based
* Call Return, Call Back on Busy, Call Blocking with Toll Restriction
* Delayed Disconnect
* Distinctive Ringing - Calling and Called Number
* Off-hook Warning Tone
* Selective/Anonymous Call Rejection
* Hot line and Warm Line Calling
* Speed Dialing of 8 Numbers/Addresses
* Music on Hold
* Password Protected System Reset to Factory Default, Password Protected Ad
& User Access Authority, Provisioning/Configuration/Authentication
Up to 256-bit AES Encryption
PCKG CNTS: PAP2T Phone Adapter Unit ; Power Adapter, RJ-45 Ethernet Cable
Quick Installation Guide