MARKNET X2031E ETHERNET 10/100 3 PT
External Print server kit includes power cable. MarkNet X2031e 10/100BaseTX Ethernet 90MHz 2MB RAM RJ-45 connector 2 parallel ports 1 serial port
External print server to connect a parallel/sertial printer to Ethernet PI DATE: August 2000 NW: 10/100BaseTX Ethernet I/FACE: RJ-45 connector, 2 parallel port, 1 serial printer SPEED: 90MHz on-board processor MEM: 2MB RAM, 2MB Flash Memory SW: Lexmark MarkVision and MarkVision for Intranets (to install & manage) SIZE: 158(D)x132(W)x38(H)mm *Enhanced Resident Web Server for setup and configuration *Internet Printing Protocol (IPP) support enables printing over the Web *Connect up to printers/plotters in 1 location to Ethernet Lexmark NetPnP & Lexmark NDPS Gateway provide automatic installation of Lexmark network printers in Windows NT 4.0 & Novell NDPS 2.0 environments NETWORK PROTOCOLS AND SERVICES (simultaneous support): TCP/IP, Novell IPX/SPX, AppleTalk, LexLink (DLC/LLC), NTP: Network Timing Protocol, IPP: Internet Printing Protocol, SLP: Service Location Protocol NETWORK OS: Apple MacOS 7.5+, Novell NetWare 3.x,4.x.,5.x MS Windows NT Server 3.1/3.5/3.51/4.0, 95/98(Peer-to-Peer networking),2000 IBM OS/2 Warp Server, IBM OS/2LAN Server 3.0 and 4.0 UNIX:Compaq Tru64,HP-UX 10.x,11.x,IBM AIX 4.x,Red Hat Linux 5.2, 6.0, SCO OpenServer 5.x, SCO UnixWare 2.1.x, 7, SGI IRIX 6.x, Sun Solaris x86 2.5, 26., 7, 8, Sun Solaris 2.5,2.6,7,8, SuSE 6.1 Linux, TurboLinux WS3.6 IBM AS/400 system with TCP/IP, IBM Application System/400 with OS/400 V3 CLIENT OS: MS Win 3.1,95/98, NT3.51,4.0; MS-DOS or IBM DOS 5.0,IBM OS/2.21 REQUIREMENTS: Version 4.7 of the "Drivers, MarkVision and Utilities" CD