P/SCAN 7000BT KBW B/STAT ONLY
BLUETOOTH BASE FOR POWERSCAN 7000BT WEDGE I/F. RECEIVES DATA FROM SCANNER UP TO 100m AWAY. POWER SUPPLY AND DATA CABLE REQUIRED
View Brochure
PI DATE: JULY 2007
PRODUCT: Base Station Only (Wedge I/F), No P/S, No Data Cable
COMPATIBILITY: PowerScan 7000BT Wedge Scanner (DSC0102)
REQS: Power Supply & Data Cable required
BT W'LESS RANGE: up to 328'/ 100 m range
BASE STATION COMPONENTS: Antenna, Link Button, Link Bar Code
Green LED, Amber LED, Scanner Latch
DIMENSIONS: 239 x 117 x 48 mm (antenna down); WEIGHT : 358 g
* The PowerScan 7000 Imager uses Bluetooth wireless tech for comms
between the user's handheld scanner and Base Station
* The scanner and Base station operate on a master/slave system, with
the Base station acting as the master and the scanner as the slave
* Linking the Scanner to a Base Station:
* To link a scanner to a Base Station, press the Link Button on the
Base Station for at least 1 second to place the base in "Link Mode",
then scan the Link bar code located on the Base Station using the user's
scanner to be linked; The Link bar code on the Base Station contains an
identifier that is unique to that Base Station
* This enables the scanner to quickly find & link to that Base Station
* When the generic Link to Base Station label is used for linking, user
will notice that linking is slower & a rescan of the label may be reqd
before a successful link is made; If 2 Bases are in the linking mode
at the same time, the generic label will not be able to initiate a
successful link, since the scanner will not know which Base Station
it is supposed to link to