CP-PWR-INJ=
Check eligibility for SBCS price IP Phone Power Injector For 7900 Series Phones
PI DATE : August 2007 PRODUCT : Cisco Unified IP Phone Power Injector Phone casing composition: Polycarbonate acrylonitrile butadiene styerene (ABS) plastic in textured dark gray color Power requs: Power is intg LAN connection: Max Enet cable length: 100m from switch to device Type: RJ-45 ; Label: DATA-Network Device connection : Max Enet cable length: 100m from switch to device Type: RJ-45 ; Label: DATA and PWR-PHONE LEDs : Two-"Power" and "Status" Stackable : Yes-Two injectors can be stacked Wired pairs used : Injects power into 2 unused pairs in the Enet cable: 4 and 5 (negative) and 7 and 8 (positive) Dimensions (H x W x D): 41 x 118 x 138mm ; Weight : .66 lb (.30 kg) Input: AC input voltage range: 90 to 264 VAC AC input current: 0.5A (RMS) @ 90 VAC at maximum load AC input frequency: 47 to 63 Hz Maximum inrush current: 20A @ 115 VAC, 60 Hz, Cold Start, 25C 40A @ 230 VAC, 50 Hz, Cold Start, 25C Output: DC output voltage: 48 VDC nominal Maximum output power: 15.5W @ 48 VDC * A desktop & desk-area single-port midspan injector with integrated power * 802.3af/IEEE Power over Ethernet (PoE) support * Gigabit Ethernet support * Full enterprise-level compliance