SANBLOC S50 SINGLE JBOD 584GB 15K
SAS-PERFORMANCE ROHS 2U 12BAY SAS JBOD WITH A SINGLE SAS I/O CONTROLLER (SIOM). IT COMES WITH REDUNDANT/HOT SWAPPABLE POWER & COOLING A RAIL KIT
PI DATE: APRIL 2006
FORM FACTOR: 2U RACK SAS- Performance ROHS
DATA T/RATE: 4800MB/s bandwidth in a redundant system
MAX SAS CABLE LENGTH: Up to 6m
DIMENSIONS: (8.9cm H x 44.7cm W x 49.53cm D)Weight (27 kg) max
STORAGE: 584 GB HDD Form Factor 25.1mm height
CAPACITY: SATA: Up to 12 drives (6TB) capacity per 2U enclosure
SAS: Up to 12 drives (3.6TB) capacity per 2U enclosure
HOT-SWAP AND REDUNDANT COMPONENTS: Up to 2 SAS I/O modules , 2 advanced pow
& cooling modules (APC), 2 independent AC power inlets
POW:: 430 W average
HOST INTERFACE:1 SAS I/O modules per system; each I/O module supports
2 SAS connections Each SAS connection supports 1,200MB/s
DISK DRIVE INTERFACE: 12 independent 300MB/s point-to-point connections to
each SAS or SATA disk drive with dual port access and
failover by each controller to each drive
MEASURED PERFORMANCE: Up to 750MB/s (sustained reads)
I/O MODULE FEATURES: Dual active, redundant, SAS and SATA support, Auto
negotiate speeds, Inband and out-of-band management
SMP and SSP command/protocol support Redundant cable
* 4800MB/s bandwidth in a redundant system*
* Mix and match SAS and SATA drives to balance performance, reliability and
* Meet growing data demands with 6TB of SATA storage or 3.6TB of SAS storag
* Point-to-point connectivity isolates drive failures, increasing reliabili
performance